Component – BLOC

Component

FOLLOWING STEP BY STEP FOR SPECIFIC PRACTICE. YOU WILL KNOW THE DETAIL OPTIONS THROUGH THE PRACTICES.
01 KEY USP > 02 COMPONENT > 03 CONFIGURATION > 04 INSTALLATION > 05 SOFTWARE CONFIGURATION > 06 EVALUATION > 07 CERTIFIED PARTNER


Unit Cabinet

Main & Secondary Unit Cabinet

There is two types of unit cabinet, Main and Secondary one. The main unit cabinet has power input socket delivering with power outlet and power output cable delivering power to other secondary unit cabinet.

Pitch Type Model Code
P0.9 Main (Bottom) LSAA009-MX
Secondary (Normal) LSAA009-SX
P1.2 Main LSAA012-MX
Secondary LSAA012-SX
P1.5 Main LSAA015-MX
Secondary LSAA015-SX

Rear of main unit cabinet

Rear of secondary unit cabinet

Unit Cabinet structure

BLOC’s Unit Cabinet structure is composed of LDM Holder, Frame, and Back Cover as shown below. LDM Holder is equipped with 6 pieces of LDM and PCB board to support frame attachment and detachment by 6 magnets. The Frame protects the LDM and PCB circuits from external impact or shock when Unit Cabinet serves to mount on the Wall Mount Bracket. The Back Cover protects the PCB mounted on the LDM Holder and the circuit board mounted on the Frame.

LDM Holder

Frame

Back Cover


LED System Controller

Pixel Pitch Model Code
P1.2 CSAA-012X
P0.9 CSAA-009X
P1.5 CSAA-015X
Operating System webOS 4.1
Input HDMI(3), DP(1), USB(1)
Output Ethernet(5Gx8), SPDIF(Audio, 5.1ch)
Control IR(1), RS232C In(1)/Out(1), Ethernet(1)
Storage 16GB
Bit-depth 20 bit
Etc External IR/Ambient Sensor,
Built-in Wi-Fi

Let's move to Configuration

Configuration